Breco Belts
Application-specific solutions in the field of drive technology are one of Angst+Pfister’ great strengths.
The deciding factor for an excellent outcome is the early combination of technological and solution expertise into a productive joint-development team.
With the use of custom-made timing belts designed by Angst+Pfister it is possible to meet all set requirements.
Belts
General description
BRECOflex: This type of belt is extruded without any interruption of the tension members up to a length of around 30 m.
The tension member is helically wound to a maximal width of 100 mm or 150 mm, depending on the tooth profile and pitch.
We are able to supply our customers with any length and width within this range. It is recommended to use endless belts for power transmissions.
Our range of endless belts is completed by using the casting manufacturing process.
General description
BRECO-V: By welding both ends of an open-end belt together, it converts it to an endless belt. As the tension members are interrupted at the overlapping welded sector, it will lose 50% of its tensile strength. Welded open-end belts are mainly used in the conveying industry with any requested center distance. Customized solutions with coatings or added profiles are also available.
General description
BRECOmove®: The BRECOFLEXmove® is a timing belt also specifically designed for high-performance and traction drives with a particularly high stiffness requirement.
A newly developed steel cord tension member increases belt stiffness and tear-resistance, making transmission of stronger forces possible.
The tooth flank geometry has been optimized through the Finite Element Method (FEM).
This leads to an optimization of the contact pressure distribution and reduces the work of friction between the timing belts and pulley, thus minimizing wear.
In addition, a friction-optimized laminate coating is applied to the tooth side.
General description
BRECOclassic® Timing belts: With the BRECOclassic® product range we offer an extensive assortment of economically priced alternatives.
Not every application requires maximum durability or tolerances.
The BRECOclassic® product range is comprised of many models of the T-, AT-, and the T1/2 inch pitch (imperial) series available as both joined products and open length goods. HTD models are available as well.
BRECOclassic® Timing belts are made of a cost-efficient white polyurethane with a shore hardness of 92 A (TPUCLA), and they feature tension members whose design is optimally adapted to the BRECOclassic®.
As a base product, the BRECOclassic® is available in various designs with coatings, rework options or weld-on profiles.
General description
BRECOflex: This type of belt is extruded without any interruption of the tension members up to a length of around 30 m. The tension member is helically wound to a maximal width of 100 mm or 150 mm, depending on the tooth profile and pitch. We are able to supply our customers with any length and width within this range. It is recommended to use endless belts for power transmissions. Our range of endless belts is completed by using the casting manufacturing process.
BRECOflex: This type of belt is extruded without any interruption of the tension members up to a length of around 30 m. The tension member is helically wound to a maximal width of 100 mm or 150 mm, depending on the tooth profile and pitch. We are able to supply our customers with any length and width within this range. It is recommended to use endless belts for power transmissions. Our range of endless belts is completed by using the casting manufacturing process.
General description
BRECO-V: By welding both ends of an open-end belt together, it converts it to an endless belt. As the tension members are interrupted at the overlapping welded sector, it will lose 50% of its tensile strength. Welded open-end belts are mainly used in the conveying industry with any requested center distance. Customized solutions with coatings or added profiles are also available.
BRECO-V: By welding both ends of an open-end belt together, it converts it to an endless belt. As the tension members are interrupted at the overlapping welded sector, it will lose 50% of its tensile strength. Welded open-end belts are mainly used in the conveying industry with any requested center distance. Customized solutions with coatings or added profiles are also available.
General description
BRECOmove®: The BRECOFLEXmove® is a timing belt also specifically designed for high-performance and traction drives with a particularly high stiffness requirement. A newly developed steel cord tension member increases belt stiffness and tear-resistance, making transmission of stronger forces possible. The tooth flank geometry has been optimized through the Finite Element Method (FEM). This leads to an optimization of the contact pressure distribution and reduces the work of friction between the timing belts and pulley, thus minimizing wear. In addition, a friction-optimized laminate coating is applied to the tooth side.
BRECOmove®: The BRECOFLEXmove® is a timing belt also specifically designed for high-performance and traction drives with a particularly high stiffness requirement. A newly developed steel cord tension member increases belt stiffness and tear-resistance, making transmission of stronger forces possible. The tooth flank geometry has been optimized through the Finite Element Method (FEM). This leads to an optimization of the contact pressure distribution and reduces the work of friction between the timing belts and pulley, thus minimizing wear. In addition, a friction-optimized laminate coating is applied to the tooth side.
General description
BRECOclassic® Timing belts: With the BRECOclassic® product range we offer an extensive assortment of economically priced alternatives. Not every application requires maximum durability or tolerances. The BRECOclassic® product range is comprised of many models of the T-, AT-, and the T1/2 inch pitch (imperial) series available as both joined products and open length goods. HTD models are available as well. BRECOclassic® Timing belts are made of a cost-efficient white polyurethane with a shore hardness of 92 A (TPUCLA), and they feature tension members whose design is optimally adapted to the BRECOclassic®. As a base product, the BRECOclassic® is available in various designs with coatings, rework options or weld-on profiles.
BRECOclassic® Timing belts: With the BRECOclassic® product range we offer an extensive assortment of economically priced alternatives. Not every application requires maximum durability or tolerances. The BRECOclassic® product range is comprised of many models of the T-, AT-, and the T1/2 inch pitch (imperial) series available as both joined products and open length goods. HTD models are available as well. BRECOclassic® Timing belts are made of a cost-efficient white polyurethane with a shore hardness of 92 A (TPUCLA), and they feature tension members whose design is optimally adapted to the BRECOclassic®. As a base product, the BRECOclassic® is available in various designs with coatings, rework options or weld-on profiles.